Maximum distance: Multimode: 1km (1800 feet).ĭata rate copper (Ethernet): 10Mbps, 100Mbps, or 1000Mbps (automatically selected)ĭata rate fiber: 1000Mbps, Supports up to 10kb JUMBO frame Weight (media converter only): 13.4oz (0.4kg)įiber connections: LC, Multimode or Singlemode SFP module (Accepts up to two SFP modules)Ĭopper connection: RJ-45 (standard Ethernet) (Four ports available)įiber cabling: Multimode: duplex, 50/125 (recommended) or 62.5/125. Power supply included operates at 110-240vac at 50-60Hz. To use the second SFP port, you would have to buy another SFP module, which we can sell separately. You would also be able to then run another fiber link, from a SFP module in the second SFP port to another similar unit and serve another group of computers, printers, etc. An example of this use would be to run a longer fiber link from your server/router to an open office location, and then you are able to connect the media converter to four local computers. This allows the unit to act as a small Ethernet switch as well as a media converter. This unit has four RJ ports for copper Ethernet connections and two ports that accept SFP mini-GBIC modules. An additional SFP module may be ordered for the second SFP port to further extend the fiber optic network beyond this media converter. This unit includes one multimode (10/100/1000, 850nm) SFP module.
The fiber connections are LC on an inserted SFP module and the copper Ethernet connection is RJ-45. Distance on the Ethernet side is 100 meters (328 feet) using Cat-5 or better (unshielded or shielded twisted pair) copper cable. There are other variations of these fibers which allow greater distances. With a 1300/1310nm multimode SFP (LX), the distance is typically 550 meters on 62.5u, 50u, or 50u OM3 (aqua) fiber. With a 850nm multimode SFP (SX), the distance is typically 300 meters on 62.5u fiber, 550 meters on 50u fiber, and 1km on 50u OM3 (aqua) fiber. Maximum distance for this unit over fiber depends upon the SFP module and the type of fiber used. Media Converter / Switch, Multimode Gigabit, 10/100/1000BaseTX to 1000BaseFX (LC) Four Copper Ethernet ports, Two Fiber Optic SFP Ports The ME-3860-MM3-SFP2 (multimode) media converter transfers data over duplex fiber at 1000Mbps (at 850nm or 1300nm) and connects to copper Ethernet at 10, 100 or 1000 Mbps while auto-sensing the correct speed.
0 kommentar(er)
